• Residential Courses

Vitodens 200 B2HE Installation & Start Up/Commissioning [Stand Alone]

Products:

Vitodens 200 B2HE

  • Intermediate
  • 9 Modules
  • 6:5 hours

Course Overview

This class is for licensed contractors or service technicians that are beginning to or have been working with the Vitodens 200 B2HE. This class will cover detailed information of all aspects of installation (mounting, piping, venting, gas supply, wiring, programming) and start up. This class will also cover how to utilize the Viessmann One Base Digital Tools for boiler commissioning and monitoring. There will be hands on exercises for control programming, and boiler commissioning via the HMI and ViGuide App. Prior experience with condensing boiler installations or service is required.

Standard Modules

  • 9 Modules
  • 6:5 hours
Log In
Venting | Vitodens 200 B2HE [Stand Alone]Intermediate
Log In

Log in to request courses

Purpose of the presentation: To build a deeper understanding of the Vitodens 200 B1HE/B1KE and proper venting

Learning Objectives: 

  1. Identify Approved Venting Materials & Methods
  2. Explain Maximum Equivalent Vent Length Calculations
  3. Describe Venting Best Practices
  4. Discuss Exhaust Gas Recirculation and How to Avoid It


Gas Supply & Burner | Vitodens 200 B2HEIntermediate
Log In

Log in to request courses

Purpose of the presentation: To build a deeper understanding of the Gas Supply & Burner of the Vitodens 200 B2HE

Learning Objectives: 

  1. Identify Gas Quality & Pressure Ranges for Vitodens 200 B2HE
  2. Explain the Procedure to Switch Between Natural Gas and LPG
  3. Discuss the Matrix Plus Cylinder Burner
  4. Illustrate Proper Combustion Analysis Procedure


Star Up & Commissioning | Vitodens 200 B2HE [Stand Alone]Intermediate
Log In

Log in to request courses

Purpose of the presentation: To build a deeper understanding of the Start Up & Commissioning Procedures related to Vitodens 200 B2HE Boilers.

Learning Objectives: 

  1. Explain the Procedure to Purge Air from the Boiler
  2. Contrast HMI vs a Single ViGuide Commissioning
  3. Describe the Benefits of ViCare
  4. Describe Gas Pressure Check and Combustion Analysis Procedures


Control Programming Exercises | Vitodens 200 B2HEIntermediate
Log In

Log in to request courses

Hands On Training (including but not limited to):

  1. Adjust DHW time programs
  2. Access Diagnostic Menu and show inputs
  3. Access the actuator tests and engage high and low fire/move the three way valve
  4. Access the heating curve
  5. Access the fault history
  6. Introduce and acknowledge a fault
Introduction | Vitodens 200 B2HE Introduction
Log In

Log in to request courses

Purpose of the presentation: To build awareness of the Vitodens B2HE models

Learning Objectives: 

  1. Explain how the Vitodens 200 B2HE is ideal for residential or commercial applications
  2. Identify the digital connectivity and remote monitoring available for the Vitodens 200 B2HE


Mounting & Piping | Vitodens 200 B2HE Intermediate
Log In

Log in to request courses

The purpose of this presentation is to build a deeper understanding of Vitodens 200 B2HE Mounting & Piping practices.

Learning Objectives: 

  1. Identify Mounting Options for Vitodens 200 B2HE
  2. Examine the Benefits of the Four Pipe Design
  3. Explain the Reason for Primary Secondary Piping and the Benefits of Using a Low Loss Header v Closely Spaced Tees
  4. Explain why a Condensate Neutralizer is Essential and How to Avoid Condensate Backup


Start-up / Commissioning Exercises | Vitodens 200 B2HE [Stand Alone]Intermediate
Log In

Log in to request courses

Hands On Training (including but not limited to):

  1. Commission boiler with HMI & Viguide
  2. Commission & wire boiler based on an application in the application guide
  3. Illustrate the benefits of Filling and Purging procedures
  4. Prime the condensate trap
  5. Perform static and dynamic gas pressure testing
  6. Perform combustion analysis
Wiring | Vitodens 200 B2HEIntermediate
Log In

Log in to request courses

Purpose of the presentation: To build a deeper understanding of the Vitodens 200 B2HE wiring.

Learning Objectives: 

  1. Identify the Wiring Boards in the Vitodens 200 B2HE
  2. Examine Wiring Connections & their Functionality
  3. Define the Wiring Process to Cascade Vitodens 200B2HE Boilers


One Base Digital ToolsEntry
Log In

Log in to request courses

Learning Objectives: 

  1. Understand the Viessmann Account Structure and its functions
  2. Identify the available One Base Digital Apps and their benefits
  3. Describe the difference of residential and commercial boiler owner remote monitoring
  4. Describe the common method for contractors to remote monitor installations



Products Covered in this Training
  • Vitodens 200 B2HE